Slush Puppy Machine Care is very important to make sure it will last long and serve you at its best capability all the time. Slush machines need yearly maintenance and it is very simple and easy to do.
When you buy the Slush Puppy machine make sure that includes the parts needed to keep your machine running all year long. Remove bowls and tops when you want to clean them. Use “Melt” slush machine cleaner as it does a great job of removing bowl stains caused by the food coloring and slush products. Don’t forget to clean the condenser area of dirt and use a wisk broom or compressed air. Be sure to check the torque adjustment which is located at the back of the machine and make sure that it is set to zero.
Replace the lubricate o-rings. Replace condenser filter if it is more than 2 years old and if it is showing any wear and tear. Replace bowls gaskets if they are also more than 2 years old and if they showing any signs of wear and tear, check the drive shaft for any scoring on the spigot end of the shaft and if there are any marks of wear on the shaft replace it immediately. According to research evaporator brushings and seals which are part of the cab needs to be replaced yearly. Check and add lubricant to motor pivot bushing points to ensure a top performance of your machine. You should also put a dab of lubricant on micro switches for moisture protection and for free movement.
Make sure that the drains at the back are clean and clear of any debris. Set the timer and check the thermostat working properly. You may also want to run the machine with the bowls removed and the timer set to freeze to check if you have a good frost line, which means having the evaporator frosted on all levels. Inspect scraper blades for cracks, and replace it immediately before using it again. Don’t forget to check the light bulbs are working properly. Always keep it clean and don’t place it near damp areas.
Slush puppy machine care is very simple and easy to do, just keep it clean and have it inspected once in a while for wear and tear so that you can change the parts immediately so that it won’t cause any severe problems in your part.